Home > Build a Toaster Reflow Oven > Mounting X-toaster on a Front Panel

Mounting X-toaster on a Front Panel


X-toaster has been designed to nicely fit in an enclosure with an inner width of about 100mm and it comes with a set of mounting spacer bolts which allows the LCD and the LEDs to sit at the right height when mounted on a front panel.
Mounting holes and LEDs have been positioned around the LCD’s viewing area to provide a symmetrical appearance from the outside of the front panel. For this reason the board will be in an eccentric position when mounted in the chassis.


All spacer bolts are M3 threaded.
As a reference when building your enclosure you can use this drawing:


Which will result in this mounting: